845.679.2862 | Hours: MON-SAT 7-6 | SUN 8-5 | 84 Tinker St. Woodstock, NY 12498 | Get Store Directions
LOG IN ACCOUNT
Mold Blocking Primers
Prime and seal a wide variety of interior and exterior surfaces such as new drywall, wood, masonry, metal, glossy surfaces, and more. It is great for hard-to-stick surfaces like old glossy paints and clear finishes, metal, fiberglass, PVC, composites and even glass and tile. Seals and tones the surface. Resistant to the formation of mold and mildew on the underside and surface of the primer film, prolonging the life of your paint job. Inhibits rust formation when applied over clean ferrous metal such as iron and steel, eliminating the need for a separate, rust inhibitive primer. It dries to a smooth, tight film and resists flash rusting. Inhibits long-term rust from developing under the primer film when dry, making it ideal for priming interior and exterior metalwork such as iron railings, steel doors, and metal panels. Use over or under oil or water-base paints. The water-based formula is a great all-purpose stain killer with low odor and easy soap and water cleanup. May be tinted with many universal colorants. Use the Gray Primer with rich or dark topcoat colors to improve their hide and coverage. Dries in 1 hour. 1 gallon covers approximately 450 Sq. Ft.
Water-based fungicidal protective coating can be used to paint over and kill all existing mold, mildew, moss, fungi, odor causing bacteria, and any other fungal organisms. Contains an EPA registered antimicrobial to prevent the growth of mold, mildew, and other fungal organisms on paint film. Aides in covering residual microbiological and fungal stains. Binds chalky siding, masonry, and metal. For applications that have existing wet, slimy, heavy soiled, gross filth, overgrowth or loose material on the substrate a pre-cleaning step is required.
Developed for professional and commercial applications, this advanced technology water-based primer combines dependable stain blocking power with fast-drying convenience, exceptional flow and leveling with outstanding adhesion to glossy surfaces. Dried film is mold and mildew-resistant, and inhibits rust. Use on interior or exterior surfaces. Sticks to all surfaces and blocks all stains. It penetrates and seals surfaces and will not raise the wood grain. Benefits of water-based formula are: Fast dry, low odor, exterior flexibility. Easy soap and water clean up.
Our premium interior/exterior acrylic primer is formulated to meet the performance requirements of the residential and commercial markets. SEAL GRIP Interior/Exterior Acrylic Universal Primer/Sealer is especially formulated to block most stains - water, smoke, ink, markers, and tannin. SEAL GRIP has exceptional adhesion to glossy surfaces. Also recommended as a whole house primer for use on properly prepared interior or exterior wood, masonry, plaster, wallboard, cement, brick, stucco, cement composition board, and wall coverings.
